Best picks

9 Best Bike Racks for Bikes With Fenders (November 2026)

Updated on · By the Store Beez team

The best bike racks for bikes with fenders include the RAD Cycle Products Bike Rack for two bikes in the garage, the YONTUO Rear Bike Rack for carrying panniers over a rear fender, and the Steadyrack Vertical Bike Rack for fender bikes on a garage wall.

On this page (8 sections)
  1. Which bike rack works best with fenders?
  2. The best bike racks for fendered bikes
  3. How we compared these racks
  4. What should you check before buying a rack for a fendered bike?
  5. Which mount type fits your fendered bike?
  6. Do you need a rack with its own fender?
  7. Can a hitch rack carry two fendered bikes?
  8. Verdict: which bike rack should you buy for a fendered bike?

The best bike rack for bikes with fenders is the CyberRack 2-E-Bike Ramp Rack, because its V-shaped wheel cradle grips the tire and never touches the mudguard. Pick the Steadyrack Vertical Bike Rack for wall storage in a garage or apartment, and the RAD Cycle Products Bike Rack when two bikes need a stable spot on the floor.

Fenders change which racks work. A rack that clamps the top tube or hangs the bike by the frame can press on a mudguard or slide past it to bare metal.

Wheel-holding racks and rear cargo racks avoid the problem, as long as the tray or cradle is wide enough for your tire plus fender.

Our picks at a glance

  1. 1 RAD Cycle Products Bike Rack
    Best for two bikes in the garage

    RAD Cycle Products Bike Rack

    9.7/10 our score

    See it on Amazon
  2. 2 YONTUO Rear Bike Rack
    Best for carrying panniers over a rear fender

    YONTUO Rear Bike Rack

    9.6/10 our score

    See it on Amazon
  3. 3 Steadyrack Vertical Bike Rack
    Best for fender bikes on a garage wall

    Steadyrack Vertical Bike Rack

    9.5/10 our score

    See it on Amazon
  1. 4Ibera Bike Rack

    Ibera Bike Rack

    Best for heavier top and side loads
    Check it
  2. 5ROCKBROS Rear Bike Rack

    ROCKBROS Rear Bike Rack

    Best for seat-post mounting over a mudguard
    Check it
  3. 6Planet Bike Eco bike rack

    Planet Bike Eco bike rack

    Best for bikes that already have fender mounts
    Check it
  4. 7Outtag Rear Bike Rack

    Outtag Rear Bike Rack

    Best for a quick seat-post swap between bikes
    Check it
  5. 8GEEBUL Bike Rear Rack Aluminum

    GEEBUL Bike Rear Rack Aluminum

    Best for a first cargo rack on a 26 to 29 in bike
    Check it
  6. 9CyberRack 2-E-Bike Ramp Rack

    CyberRack 2-E-Bike Ramp Rack

    Best for hauling two fendered bikes on a hitch
    Check it

Which bike rack works best with fenders?

Wheel-support racks are the safest fit for fendered bikes. The tire sits in a cradle or tray while the mudguard stays clear above it.

Frame-clamp racks are the ones to skip unless your bike has a long bare seat post.

That split covers hitch racks, wall racks and floor stands. Rear cargo racks are a separate job: they carry bags, not the bike itself, and some come with their own fender so your mudguard is no longer in the way.

The rack type also decides how much of the bike's weight sits on the mudguard's mounting bolts, which are there to hold plastic, not cargo.

The best bike racks for fendered bikes

The CyberRack wins overall for hauling, while the RAD Cycle stand is the pick for storage. Each of the others fits a named need, from wall mounting to pannier loads.

Read the fit note on each one before you buy, because the fender question often comes down to a single mount point.

9

CyberRack 2-E-Bike Ramp Rack: Best for hauling two fendered bikes on a hitch

CyberRack 2-E-Bike Ramp Rack, bike racks for bikes with fenders
8.0/10Our score
  • V-shaped front wheel cradle
  • Folding ramp
  • 2 in receiver fit

A hitch rack with a wheel cradle that holds tires rather than clamping the frame. Its folding ramp helps roll heavy bikes up.

See it on Amazon

Pros

  • Ramp folds away on the rack
  • Soft padding at contact points
  • 1-year warranty

Cons

  • Needs a 2 in receiver and 67 lb of rack weight

The CyberRack suits a household that moves two bikes on a hitch and wants the mudguards left alone. Its V-shaped front wheel cradle holds each bike at the tire, so nothing presses on a fender or frame tube.

Soft padding and rubber covers sit where the rack meets the bike, so contact stays gentle even on rough roads.

It fits a 2 in receiver and takes a wheelbase up to 50 in. The folding ramp rolls a heavy e-bike or loaded commuter up without lifting, and it tucks onto the rack when you're done.

Three ratchet straps secure each bike, and the semi-enclosed connecting block plus shock-absorbing threads keep the frame steady on uneven ground. A 1000-hour salt spray coating helps it shrug off weather.

The trade-off is weight: the rack itself is 67 lb, so plan on a two-person install. It also needs a 2 in receiver, which rules out small cars with a 1.25 in hitch.

If your vehicle has the bigger receiver, this is the rack to buy for two fendered bikes. The total 200 lb limit works out to 100 lb per bike, so even a heavy e-bike with fenders and a loaded pannier fits inside the rating.

The two separate rods mean each bike is held on its own, so a loose strap on one doesn't affect the other. For a household with one e-bike and one lighter commuter, that spacing matters as much as the cradle.

CyberRack 2-E-Bike Ramp RackCheck it on Amazon
3

Steadyrack Vertical Bike Rack: Best for fender bikes on a garage wall

Steadyrack Vertical Bike Rack, bike racks for bikes with fenders
9.5/10Our score
  • Wall mount
  • Folds flat against the wall
  • Fender and mudguard compatible

A pivoting wall rack that rolls the bike in by the tire and swings it out of the way. Steadyrack rates it for fenders and mudguards.

See it on Amazon

Pros

  • Holds up to 121 lb
  • Pivots and folds flat
  • Steadyrack gives a 5-year warranty

Cons

  • Needs a masonry or timber wall

Steadyrack suits a garage or apartment where floor space is short. Roll the bike in by the tire, then pivot it sideways to free up room.

Steadyrack rates the ProFlex Narrow for fenders and mudguards and holds up to 121 lb. The roll-in, roll-out design means you never lift the bike onto a hook.

The pivot and fold design swings the bike flat against the wall and folds the empty rack away. There's no assembly out of the box, and the kit mounts to masonry or timber.

Steadyrack backs it with a 5-year warranty. It holds road, gravel, eBikes, BMX and commuter bikes, so one rack covers a mixed household.

The rack is 26.77 in deep and only 4.13 in wide, so it uses very little wall width per bike. Its 2.2 kg weight also means one person can handle the install on a sound wall.

This is storage, not transport. It won't carry a bike on a car, so pair it with a wheel-cradle hitch rack if you also drive with the bike.

Its wall requirement is the limit: renters with drywall only should check the mounting first. For a fendered commuter that lives indoors, it's the neatest option here.

Because the bike stands vertical, check that a full mudguard clears the floor and does not rest on it once pivoted.

Steadyrack Vertical Bike RackCheck it on Amazon
1

RAD Cycle Products Bike Rack: Best for two bikes in the garage

RAD Cycle Products Bike Rack, bike racks for bikes with fenders
9.7/10Our score
  • Dual freestanding floor stand
  • Tubular steel with powder coat
  • Holds tires up to 2.4 in

A two-bike floor stand that cradles tires rather than gripping frames. It keeps both wheels and mudguards clear of the stand.

See it on Amazon

Pros

  • Holds two bikes upright
  • Cradle holds tires only
  • Plastic feet steady the base

Cons

  • Floor space needed for the wide base

RAD Cycle suits a two-bike household that wants both bikes standing ready in the garage. The cradle-like floor stand holds each front tire in a slot without touching the frame or rims, so fenders stay clear.

Bikes without a kickstand park just as easily.

It takes tires up to 2.4 in wide in a 2.5 in opening, which covers most hybrid, city and mountain bikes with mudguards. Tubular steel with a black powder coat handles damp air, and the plastic feet steady the wide base on a smooth floor.

The unit weighs about 10 lb and measures 22.85 in long, 21.25 in wide and 25.625 in tall. The low height keeps it under a workbench or shelf edge.

Its limit is footprint: the wide base needs a clear patch of floor. It's the best pick when you have the space and two fendered bikes to park side by side.

Skip it if your only storage is a wall. One thing to plan for: the stand parks bikes by the front wheel only, so both slots face the same way and the handlebars need room to swing without clashing.

Back the second bike in and the bars clear each other.

RAD Cycle Products Bike RackCheck it on Amazon
2

YONTUO Rear Bike Rack: Best for carrying panniers over a rear fender

YONTUO Rear Bike Rack, bike racks for bikes with fenders
9.6/10Our score
  • Aluminum alloy frame
  • Built-in adjustable fender
  • 115 lb capacity

A rear cargo rack with its own fender and a large reflector. It turns a fendered commuter into a luggage hauler.

See it on Amazon

Pros

  • Built-in removable fender
  • Large rear reflector
  • Enlarged side wings

Cons

  • Not for soft-tail
  • carbon
  • folding or rear suspension bikes

YONTUO suits a commuter who wants to carry panniers over a rear fender. The rack brings its own adjustable, removable fender, so your mudguard isn't in the way and your bags stay dry on wet roads.

A large reflector boosts night visibility.

The aluminum frame carries up to 115 lb. The enlarged side wings keep panniers out of the spokes and off the wheels.

Stainless screws and anti-loosening, shock-proof nuts hold the rack steady on rough pavement. The top panel adjusts from 16 to 18 in and the side support rods extend from 11 to 15.75 in, so you can set the rack to your frame.

The mount is at the rear axle, and YONTUO lists a minimum seat tube height of 2 in and a seat tube diameter of 0.85 to 1.3 in.

Check the fit list before buying. YONTUO says it won't work on soft-tail, carbon fiber, folding, small-wheel or rear suspension bikes.

It mounts to the rear axle, so a bike without axle eyelets needs another rack. For a standard commuter frame, it's the strongest cargo choice here.

The 115 lb rating leaves headroom for a full pannier set, a trunk bag and a lock, and the removable fender means you can take it off in dry months if you prefer the look.

YONTUO Rear Bike RackCheck it on Amazon
4

Ibera Bike Rack: Best for heavier top and side loads

Ibera Bike Rack, bike racks for bikes with fenders
9.2/10Our score
  • Frame-mounted
  • Height adjustable
  • Splashguard fender board

A frame-mounted touring carrier with a top fender board and a quick-release bag system. It carries panniers and trunk bags on a fendered bike.

See it on Amazon

Pros

  • Top fender board
  • Quick-release bag mounting
  • Adjustable height

Cons

  • Designed for non-disc brake bikes

Ibera suits a touring rider who loads top and side bags and wants a splashguard over the wheel. The top fender board sits above the tire and keeps spray off your back and panniers on wet days.

It's a fender board for the rack, not a replacement mudguard.

The rack carries up to 55 lb and adjusts in height for 26 to 29 in frames. It's aluminum at 1.65 lb, so it adds little to the bike.

A quick-release system locks Ibera trunk bags in place, and strap-attached bags and panniers work too. It pairs with the IB-BA11, IB-BA14, IB-BA15 and IB-BA22 trunk bags.

Frame mounting puts the load on the frame rather than the seat post, which suits heavier top and side loads.

Two limits matter. It's built for non-disc brake bikes, so check your caliper position first.

It also needs frame mounts, not just fender mounts. For a fendered tourer with standard calipers, the fender board and bag system make it the handiest cargo rack in this group.

The 1-year warranty covers manufacturing defects. If you tour in rain often, the splashguard alone earns its place.

Ibera Bike RackCheck it on Amazon
5

ROCKBROS Rear Bike Rack: Best for seat-post mounting over a mudguard

ROCKBROS Rear Bike Rack, bike racks for bikes with fenders
9.0/10Our score
  • Quick-release seat-post clamp
  • Built-in rear fender
  • Red rear reflector

A seat-post rack that clamps on in seconds and brings its own rear fender. A good fit for a bike whose frame has no rack mounts.

See it on Amazon

Pros

  • Quick-release clamp
  • Removable fender
  • Elastic bungee cord included

Cons

  • Not for rear suspension
  • carbon or folding bikes

ROCKBROS suits a rider whose bike has no rack mounts and who wants a rack that comes off in seconds. The quick-release seat-post clamp mounts with the included tools and instruction, and you can drop it when you don't need cargo.

You can also change seat height without removing the rack.

A built-in rear fender keeps your bag dry, and you can remove it when the weather clears. Two W-shaped side bars protect panniers from the wheel and spokes.

A red reflector and an elastic bungee cord come in the box. The frame adjusts in length, and the telescopic rods stretch 1 to 6 in to fit 26 to 29 in bikes.

It weighs about 1200 g and measures 20.67 in long and 5.51 in wide.

It won't fit rear suspension, fat tire, soft-tail, carbon fiber or folding bikes. Load stays at 55 lb, and how much you carry depends on your seat post.

For a simple commute with a fendered bike that lacks mounts, it's the quickest fit here. The clamp also means one rack can move between two bikes in a household without tools, which the frame-mounted racks here can't do.

ROCKBROS Rear Bike RackCheck it on Amazon
6

Planet Bike Eco bike rack: Best for bikes that already have fender mounts

Planet Bike Eco bike rack, bike racks for bikes with fenders
8.8/10Our score
  • 6061 tubular aluminum
  • Pre-installed stainless hardware
  • Open side rails

A light rear rack for bikes that already have the mounting points. Open side rails keep heel clearance clear when panniers are loaded.

See it on Amazon

Pros

  • Mounts quickly with pre-installed hardware
  • Open side rails for heel room
  • Planet Bike gives a limited lifetime warranty

Cons

  • Needs rear fender or rack mounts on the bike

Planet Bike suits a fendered bike that already has rack mounts. The Eco rack bolts to those mounts and leaves your mudguard in place, so nothing has to come off.

The mounting hardware comes pre-installed, so it goes on quickly.

It's 6061 tubular aluminum with stainless hardware. Open side rails give heel clearance when panniers are loaded.

A rear reflector or tail light tab takes most Planet Bike lights using the #3108 and #3087-2 brackets. Planet Bike backs it with a limited lifetime warranty, and the rack holds up to 55 lb.

The top panel is 12.5 in long and 5.5 in wide, and the spacing between the lower attachments is 5 in. Planet Bike says it fits 97 percent of mountain and hybrid or road frames.

The catch is the mount. A bike with fender-only mounts can't carry a loaded rack on this model.

Check for separate rack eyelets near the rear axle before you buy. If your bike has them, this is the lightest and simplest rear cargo pick here.

At 1.5 lb it barely changes how the bike rides when the rack is empty. The lifetime warranty also makes it the low-risk choice for a bike you plan to keep for years.

Planet Bike Eco bike rackCheck it on Amazon
7

Outtag Rear Bike Rack: Best for a quick seat-post swap between bikes

Outtag Rear Bike Rack, bike racks for bikes with fenders
8.3/10Our score
  • Seat-post mount
  • Retractable alloy frame
  • 55 lb capacity

A retractable seat-post rack that fits seat tubes from 27.2 to 31.8 mm. The raised tail and front flap help hold a load in place.

See it on Amazon

Pros

  • Fits a range of seat tube sizes
  • Folds down when not in use
  • Stainless steel screws

Cons

  • Load depends on seat-post strength

Outtag suits a rider who swaps a cargo rack between two bikes or takes it off for weekend rides. The seat-post clamp fits tubes from 27.2 to 31.8 mm, and the alloy frame retracts when not in use.

The mounting bracket fits seat tube diameters of 1.1 to 1.3 in.

The raised tail and front flap help keep a bag or basket from sliding off. Stainless screws resist rust, and the aluminum frame holds up to 55 lb.

Eight rubber pads in the kit let you fit the clamp to different seat-post sizes without slipping. A 5mm Allen key and 6mm wrench come in the box.

The shelf measures 13.4 in long and 4.7 in wide. Outtag also states the rack suits seat rod calibers under 1.3 in.

The load limit depends on your seat post, not just the rack. Outtag also warns against riding on the rack or loading it near the top weight.

For light commuting and errands on a fendered bike, it's a flexible, removable choice. The 8 pads matter if you own two bikes with different post sizes, because the same rack can move between them without a second purchase.

Outtag Rear Bike RackCheck it on Amazon
8

GEEBUL Bike Rear Rack Aluminum: Best for a first cargo rack on a 26 to 29 in bike

GEEBUL Bike Rear Rack Aluminum, bike racks for bikes with fenders
8.1/10Our score
  • 6061-T6 aluminum frame
  • Four-position height adjustment
  • Integrated reflector

An alloy rear rack with height adjustment and a full tool kit in the box. A simple pick for a rider adding cargo capacity for the first time.

See it on Amazon

Pros

  • Tools included for install
  • Four height positions
  • Powder-coated finish

Cons

  • Won't fit some outside-mounted disc brake calipers

GEEBUL suits a first-time cargo user on a 26 to 29 in bike who wants everything in one box. The kit includes the tools and a visual guide, so the rack goes on without a trip to the shop.

GEEBUL says assembly takes about 10 minutes.

The 6061-T6 aluminum frame carries up to 60 lb. Four height positions adjust to your wheel size and frame.

An integrated reflector adds night visibility, and the powder-coated finish with stainless hardware resists rain and mud. The rack weighs 2.2 lb and fits MTB, road, city and hybrid bikes.

GEEBUL says the frame was lab-tested for 100K shakes at its rated load.

Fit is the thing to check. GEEBUL says it won't fit bikes where the disc brake caliper sits outside the frame seatstay and blocks the mounts.

For a standard fendered hybrid or mountain bike without that layout, it's a solid budget cargo rack. The 60 lb rating is a little higher than the 55 lb Planet Bike, ROCKBROS and Outtag racks, so it suits a heavier pannier load on a bike that has the mounts for it.

GEEBUL Bike Rear Rack AluminumCheck it on Amazon

How we compared these racks

Our score weighs specs, features and buyer feedback against what you're shopping for. For fendered bikes, the first question is whether the rack holds the tire or the frame.

Wheel-cradle and wheel-tray designs scored higher because they leave mudguards alone.

Next we checked stated load limits, mount type and fit notes. Racks that name their limits, like the 115 lb YONTUO or the 121 lb Steadyrack, are easier to match to a loaded bike.

We also weighed the fender question for cargo racks: some bring their own fender, some need separate rack mounts. A rack that names its excluded bike types, like the YONTUO list or the GEEBUL disc brake warning, is easier to rule in or out before you pay.

Ease of install and storage counted too. A rack that folds flat or clamps on in seconds helps more than a heavier one that needs a shop visit.

Every score stays the same across the site, so you can compare a rack here with its review. The CyberRack scores lower than some storage racks because its 67 lb weight and 2 in receiver limit who can use it, not because its cradle is worse for fenders.

ProductBest forMaterialMount typeTire openingOur score
RAD Cycle Products Bike Racktwo bikes in the garageTubular steelFreestanding2.5 in9.7
YONTUO Rear Bike Rackcarrying panniers over a rear fenderAluminum alloyRear axle mount9.6
Steadyrack Vertical Bike Rackfender bikes on a garage wallPlastic and resinWall mount9.5
Ibera Bike Rackheavier top and side loadsAluminumFrame mount9.2
ROCKBROS Rear Bike Rackseat-post mounting over a mudguardAluminum alloyRear seat mount9.0
Planet Bike Eco bike rackbikes that already have fender mountsAluminumFender or rack mounts8.8
Outtag Rear Bike Racka quick seat-post swap between bikesAluminum alloyRear seat mount8.3
GEEBUL Bike Rear Rack Aluminuma first cargo rack on a 26 to 29 in bikeAluminumRear seat mount8.1
CyberRack 2-E-Bike Ramp Rackhauling two fendered bikes on a hitchAluminum and steelHitch8.0

What should you check before buying a rack for a fendered bike?

Check three things first: how the rack holds the bike, how wide the tire plus fender is, and whether the mount matches your frame. Get those right and the mudguard stops being a problem.

Does the rack hold the wheel or the frame?

Wheel-holding racks cradle the tire and keep the fender clear. That covers the CyberRack's V-cradle and the RAD Cycle floor stand.

Frame-arm racks need bare frame or seat post to grip, so a full-coverage fender gets in the way. On a fendered bike, favor the wheel.

The same rule applies to the rack's straps: a strap that cinches over a mudguard can crack plastic over time.

How wide is your tire with the fender?

Measure the tire plus the fender, not just the tire. The RAD Cycle stand takes tires up to 2.4 in wide in a 2.5 in opening.

A cradle or tray that fits 2.4 to 2.5 in leaves room for a mudguard on a commuter tire. Fat bikes with fenders need a wider cradle than these.

A wheel cradle rated for a 5 in fat tire, like the one the CyberRack describes as accommodating a variety of tire sizes, is more room than a commuter needs.

Do you need to carry the bike or just store it?

Hitch and wall racks carry or hang the bike. Rear cargo racks carry bags and leave the bike on the ground.

If you need to drive with the bike, a wheel-cradle hitch rack is the fit. If you only need storage, a wall rack or floor stand saves space.

Mixed households often buy one of each. Budget for the pair rather than forcing one rack to do both jobs, because no rack here both hauls a bike on a car and carries a loaded pannier set.

Which mount type fits your fendered bike?

The mount type decides whether the rack even bolts on. Match it to your frame before you compare features.

A rack that lists its fit range is safer than one that only says universal. Count your bike's mounting points first, then pick the rack type to match.

Rear axle or frame mounts

YONTUO and GEEBUL mount at the rear axle area. Planet Bike needs separate rack or fender mounts.

Check for eyelets near the rear axle and at the seat stays. A bike with fender-only mounts can't take a loaded rack on these models.

Planet Bike's spec says the bike must include a rear fender or rack mounts to fit, so read that line before ordering.

Seat-post mounts

ROCKBROS and Outtag clamp to the seat post, so frame mounts don't matter. That makes them the easy fit for a fendered bike with no eyelets.

The trade-off is load: seat-post racks carry less and depend on the post's strength. ROCKBROS fits 26 to 29 in mountain frames, and Outtag fits seat tubes from 27.2 to 31.8 mm.

Check the post size on your bike, because the clamp range is the fit.

Wall and floor stands

Steadyrack needs a masonry or timber wall. The RAD Cycle stand needs floor space and no wall at all.

Renters with drywall only should look at the floor stand first. Homeowners with a garage wall get the space saving of the Steadyrack.

Either way, the stand or rack should hold the tire, so your fender stays clear whichever storage type you pick.

Do you need a rack with its own fender?

A rack with its own fender helps when your bike's mudguard blocks the mount or when you want extra spray protection. YONTUO includes an adjustable, removable fender and a large reflector.

ROCKBROS adds a removable rear fender plus a red reflector. Ibera uses a top fender board as a splashguard.

If your bike already has full-coverage fenders, you don't need a second one. A plain rack like the Planet Bike Eco or GEEBUL leaves your mudguard in place as long as the mounts clear it.

Buy the fender version when the mount is the problem, not when your own fender already works. On a wet commute, a second fender over the rack also protects the bag's base from road spray.

The removable fenders on the YONTUO and ROCKBROS racks also mean you can take them off in dry weather, so you keep the option open either way.

Can a hitch rack carry two fendered bikes?

Yes, when the hitch rack uses a wheel cradle or tray. The CyberRack holds two bikes by the front wheel in a V-cradle and straps them at three points.

That leaves both mudguards untouched.

Check the receiver size first: the CyberRack needs a 2 in receiver and holds up to 200 lb total. A 1.25 in hitch on a small car won't take it.

If you're weighing a roof rack instead, our roof rack vs hitch rack comparison covers the trade-offs. For three bikes on a hitch, see our roundup of the best 3 bike hitch racks, and our MaxxHaul bike rack review covers a budget alternative.

If you only move one bike, our best single bike hitch racks guide has the narrow fits.

Verdict: which bike rack should you buy for a fendered bike?

Buy the CyberRack 2-E-Bike Ramp Rack if you drive with two fendered bikes and have a 2 in receiver. Its wheel cradle and folding ramp do the heavy lifting without touching the mudguards.

For storage, the Steadyrack is the best bike rack for bikes with fenders that live on a wall. Its pivot and fold design holds up to 121 lb and Steadyrack rates it for fenders.

The RAD Cycle stand wins when two bikes need floor space and no wall mount.

For cargo on a fendered commuter, pick YONTUO if the frame fits its mount list, or ROCKBROS if the bike has no rack mounts. Whichever you choose, hold the bike by the wheel and leave the fender alone.

Our top 3 picks at a glance

  1. 1 RAD Cycle Products Bike Rack
    Best for two bikes in the garage

    RAD Cycle Products Bike Rack

    9.7/10 our score

    See it on Amazon
  2. 2 YONTUO Rear Bike Rack
    Best for carrying panniers over a rear fender

    YONTUO Rear Bike Rack

    9.6/10 our score

    See it on Amazon
  3. 3 Steadyrack Vertical Bike Rack
    Best for fender bikes on a garage wall

    Steadyrack Vertical Bike Rack

    9.5/10 our score

    See it on Amazon

Frequently asked questions

Will a hitch rack fit a bike with fenders?

Yes, when the rack holds the bike by the wheels rather than the frame. Wheel-cradle and wheel-tray racks leave the mudguard alone.

A frame-arm rack needs about 2 in of bare frame or seat post above the fender.

Can I use a roof rack with a fendered bike?

Yes, but the rack needs a wheel tray long enough for your tire plus mudguard. A short tray can pinch the fender at the front edge.

Measure your wheelbase and the gap from tire to fender before you buy.

Do rear cargo racks work on bikes that already have fenders?

Some do. Racks with their own fender, like the YONTUO and ROCKBROS, replace or sit above yours.

A rack like the Planet Bike Eco needs separate rack mounts on the frame.

Fender-only mounts will not carry a loaded rack.

How much does a fendered commuter bike weigh?

Fenders add about 1 to 2 lb to a typical city bike. A loaded commuter with a rack and panniers can reach 40 lb or more.

Check a rack's stated weight limit against the bike plus your bags.

Can I leave a fendered bike on a wall rack long term?

Yes, if the rack supports the tire and the wall can take the load. A pivoting wall rack like the Steadyrack holds up to 121 lb and folds flat.

Check that your fender does not press against the wall when pivoted.

Will fenders scratch in a wheel-cradle rack?

The cradle holds the tire, not the fender, so contact stays at the rubber. Check that the cradle arms clear the mudguard edge on wide tires.

A cradle rated for 2.4 to 2.5 in tires leaves room.